2003 SE Rockford Fosgate stereo?

Originally Posted by TXOSO View Post Well folks I got the amp in stalled, it was tricky but it went pretty easy, I took my factory license plate frame and mounted the amp on it and it mirrors the Hog Tune set on the other side of the fairing. The Hog Tune The sounds is mind blowing, it so loud that it almost hurts when your sitting on the bike. After fine tunning the amp, it really came alive and sounds so clear and clean. You can flip the switch to 2-channel if your only running 2 speakers and as long as your speakers can handel the power, it will drive them fine. I bought the amp at a stereo shop at traders village here in Houston, the guy is a certified Rockford Fosgate dealer and fully warrantys his products. I f you want more info. I will take some pics tomorrow and post them.

Loudspeakers and Speaker Stuff

Friday, October 15, – First off, I have JVC 40×4 head unit not sure of model offhand, it’s about 4 years old. The fronts work fine even now. I had the speakers hooked to a Koiilenger sp?

Dec 07,  · I previously had the Rockford Fosgate system that comes with the PRO-4X. I thought I’d hook up one sub per channel. Got the wiring color from I’m confused. Am I really screwing up the bridging thing or is this amp crap now? I hope it’s the amp. 2. The RCA cables from this amp is connected to the unit directly as there is a sub out.

Remember Polaroid instant cameras? It was only a few years ago when you may have noticed DVD players branded with the Polaroid name. Well, unfortunately in most cases, the same passing along of name brands happens in the car audio world. I myself, dropped out of the car audio industry for nearly 10 years and when I returned, the brands I knew once as high quality, “Made in the USA” were well Now, why must I bore you with history of car audio brand names?

Well, because the next amplifier I’m going to talk about is the Crunch CR from approx. This amp was one of several made by Zed Audio, regarded by many as some of the better old school amps. Other brands, such as HiFonics and Autotek among others , had models of amplifiers made by Zed Audio. If you happen to visit or search eBay, you’ll notice the Zed-built amps usually go for a premium. Unlike most modern car audio amps, the CR has a harness for speaker connections.

I’m not sure why companies continued to use these harnesses instead of barrier strips into the mid 90’s?. As most of you know, these harnesses are usually lost over the years or have been cut so many times, the wires are too short!


I originally had the Alpine 9-speaker system with sub. Because UConnect has so much functionality besides audio, replacing the head unit was out of the question. There are many other DSP units from other manufacturers, but I was hoping the out of the box compatibility with Jeep UConnect would make it less painful. The Maestro harness gets connected to the original wiring coming off the head unit that connected to the factory amp, which was in the left well in the cargo area.

The wiring harness was long enough, as the DSP module went in an alcove in the left cargo area.

Rockford Fosgate T Amp w x 4, Punch P2 10 sub, and custom enclosure that fits under the rear seat in a Chevy Silverado. Also included is an inline fuse, ground cable, and owners manual.

Notify me of follow-up comments by email. Notify me of new posts by email. This site uses Akismet to reduce spam. Learn how your comment data is processed. It was installed on time and as quoted , we couldn’t be happier! Ma’s secret recipe from the old country will be safe for years to come. Phillip Excellent customer service and attention to detail. These guys are true professionals! Greg I was impressed at Shawn’s professionalism and patience to suggest and explain the different options that will suit my need.

The job was done perfectly and in record time as well. I will definitely go back for other services and will not hesitate to recommend Certified AutoSound. Tayo Stereo Upgrade for Chevy 05 Shawn did a great job describing the product to myself and ensured it would meet my requirements. The auto starter they installed in my car functions great and has every option I wanted.

They did a great job on some custom dash work and installing under car LED’s for me.

wiring diagrams rockford fosgate amplifiers

Most common housings for this turbo are 0. This is a good turbo if you have an automatic, and can be daily driven. Somewhat bigger than the TS04, this turbo can make rwhp. It requires an upgraded fuel system. Capable of making rwhp, the T66 is a bigger turbo yet, this is probably as big a turbo as I would recommend for the street, it makes full boost right around rpm on most cars, a significant amount of lag, but not horrendous… full boost being 1.

Can you hook up two Weknowtheanswer. ABOUT; FIND THE ANSWERS. Can you hook up two 10″ boss phantom p10dvc to the rockford fosgate rx1d? Free e-mail watchdog. Tweet. Answer this question. Can you hook up two 10″ boss phantom p10dvc to the rockford fosgate .

Amp in Protect Mode – Troubleshooting Foreword: I get so many questions about amplifiers going into protection or blowing fuses after remote turn-on voltage is applied that I’ve decided to provide a page to help determine if the amplifier is faulty or if a fault in the system is causing a problem. Many amplifiers will illuminate their protect LED during the mute delay when you initially power up the amplifier.

After a short delay seconds , the protect LED will go off. For those amplifiers this is normal. If you know how your amplifier behaves when the amp is in good working order, it will make troubleshooting much easier. If you are unsure about this, you can email me or ask someone on a forum where they’re familiar with the amplifier you have. For the most part, this page is for amplifiers that go into protect mode and remain in protect mode or go into protect mode when the amplifier is driven hard.

Many times, the protection indicator will blink to indicate the reason the amp is in protect mode. The owner’s manual is the best source to help you decode the blink sequence. This is common on older Alpine amplifiers.


Rockford Fosgate Top rockford fosgate prime watt class d 1 channel amplifier r d Content The F. No cap – but i’m considering one now. I will see how the lights stay stable or not tonight.

This is the 6th Rockford Fosgate amp I’ve owned (Punch PX4 & 2 PX1bd’s in my truck). I’m using this one in my boat powering 2 Alpine SWR-M’s that are rated for w RMS. Like all RF amps the true power is greater than advertised with this one being w RMS @ 2ohm. 1 year of use in marine environment and it performs like s: 1.

Rockford Fosgate Rzr Stage 3 system? When riding, is 37 loud enough? Is 40 too loud? If 40 is too loud, I would say the system is operating perfectly fine, you are just at the upper end of the volume and there isn’t any reason to turn it to If 40 is NOT too loud when riding and you want more from the stereo, I would say turn the gains up. If you do just take them back to the authorized dealer you purchased the system from and they can warranty them. The birth certificates on those amps are usually between RMS so the speakers and amp work well together.

Rockford Fosgate DSR1 and Maestro software to go with aftermarket stereo system

Diamond Audio Subwoofer Wiring Diagram. Rockford Fosgate P 1 Wiring Diagram. Looking for unique ideas is probably the fun activities but it can be also annoyed when we might not find the desired concept.

Apr 07,  · – – Rockford Fosgate Tbd – no output, no protect, no smoke Took a look at this amp again this morning jst to verify audio passing through the board. I have audio at rca inputs, but it doesnt seem to enter any of the boards. and when I connect the remote it jumps to 67 then when I hear the tick from the speakers (unmuting?) it.

I have been offering a full range of podiatric medical services, from ingrown nails to heel pain and foot surgery, to my friends and neighbors in the Las Virgenes, Conejo and Simi Valleys since This is my personal web site. It has been up since and has received more than 2 million visits. The entire site is my responsibility only and nearly everything on the site was written by me. You are welcome to peruse this site and learn what you can about me, your feet and the problems your feet can develop.

Things happen fast in medicine so whatever you read could well be outdated, especially if it was written many years ago. On this site you will read historic articles that I wrote for a lay audience as long as 25 years ago, so please do not take anything on this site as definitive or as applying directly to your condition.

You may wonder why I have my own site even though there is also an official practice site. Well, my partners are of a younger generation raised on tweets, e-mails and iPhones. They want a professional site that they believe better represents the professional nature of our practice.

Need help Rockford fosgate 1500bd amp

It works fine right through the plastic dashboard. Unfortunately, this is a eBay listing so this link may eventually expire: The Pioneer supports two USB inputs. I should warn though that it was quite the pain to disassemble that cigarette lighter holder.

Rockford Fosgate is the only American amplifier manufacturer to have invested millions into this process. DSM components differ from conventional discrete components in different ways. They are more compact, more rugged, and they efficiently dissipate generated heat.

CarAudioNow has put together a quick guide to do a basic tune on your amplifier to make your stereo reach it’s potential. Use it to tune subwoofers or speakers alike. But before we get into tuning, let’s review a few basic and common terminology, features and functions that will help you better understand the tuning process. Also see our Choosing the Best Amplifier post to see how to choose the proper amplifier to best fit your speaker and subwoofer setup if you haven’t already chosen one.

RMS Power is a measure of the amplifier’s continuous power. It’s the realistic amount of power that the amplifier is rated for. It’s more of an average of the wattage output over a set amount of time. It is not the amount of power the amplifier emits on a continuous basis, but more of a quick burst. Even though the Peak Power ratings are marketed by speaker and amplifier manufacturers to catch the eyes of consumers, it is not the Peak Power, but the RMS Power that you want to use as a tool to match the right speaker with the right amplifier.

Gain Gain is the input sensitivity adjustment necessary that is used to match an amplifier’s input to the receiver’s output. A properly adjusted gain reduces background noise, distortion and prevents speaker damage. Frequency Frequency is the pitch at which your speakers emit sound at. You will need to know the range of your speakers or subwoofer in order to tune your amplifier properly.

The optimal setup will have speakers that cover the high range frequencies, while subwoofers will cover the low range frequencies, without any gap in between the frequency coverage.


A tv agency who are running an ad campaign recently contacted me regarding making a documentary about this van. All the work was done in japan. Please call on , any inspections welcome. Modified Vehicle Report on my November new shape Peugeot — 11 PAD Number plate is not included in this sale but maybe available, also have reg no:

Apr 26,  · hey guys i have a system hooked up to my car and i have 2 amps. one is a mtx watt 2-channel for the subs and i have another amp for my 6x9s in back its a rockford fosgate A4 4-channel amp. i am trying to hook up the 4-channel amp.. can somone tell me how to hook this up along with the amp for the subs.

How do you hook up a new car stereo? Well it helps if you have a repair manual for your car so that you can reference the wiring schematic for the stereo connections it will eliminate a lot of guess work. Using a multimeter find a wire in the connector in the dash that was formerly on the stock radio that has 12 vol…ts when the key is off and this will be your Batt.

Now with the key on find a second wire with 12 volts and this will be your Ign. If you have a power antenna there should be a connection for that on the new stereo and the wiring schematic will tell you which one that is. As for the speakers once again a schematic is the best way but you can take fir instance the left front speaker wires from the new stereo with the unit turned on and tuned to a station and through trial and error find the two that feed the left front speaker or Ive heard you can use a 9v battery and listen for a buzz to identify the correct wires, or use the continuity tester on the multimeter to identify the wires.

Does a Bandpass box beat harder, and sound better than….

Why not make the experience more worthwhile with music? Nothing screams having a blast like blasting the speakers up in a car while hanging with your buddies out on the road and now you can do the same thing in your side by side. What you have been longing for is a Rockford Fosgate Stage 4 Audio System to blast those tune out on your off-road adventure! It is equipped with a custom modeled, color matching dash kit that mounts to the factory storage pocket.

The display is full color with an auto dimming backlighting and is Pandora controlled along with Bluetooth technology.

Installation and connect the negative then hook up the speaker outputs to lea michele dating installation instructions will not particularly easy, so there are .

I have very little experience doing these kind of stuffs so this is by no means a professional job. It’s just to show if a novice like me can do it in a few hours, then anyone can do it also. I purchased a plus a Rockford Fosgate Prime R amplifier. I also bought an amp wiring kit and a Scosche line out converter LOC. First up is installing the TacoTunes subwoofer. This is probably the hardest part.

Rockford Fosgate Bayliner TM400X4AD AMP INSTALL!